Tile floor protection
Tiles are durable, but not impossible to damage. Grit beneath a ladder, a dropped tool or a trolley crossing an exposed edge can leave a defect long after every trade has gone.
Floor Protection® supplies multi-layer tile floor protection for builders, tilers, painters, renovators, fit-out contractors and resellers across Australia. Our self-adhesive rolls create a stable barrier against dirt, dust, paint, spills, scuffs and trade traffic, without covering the tiles in construction tape.
Every standard roll measures 1m × 50m and contains 50m² before overlaps and cuts. Four grades cover light painting through to multi-trade construction, including a tested breathable option for eligible recently finished floors.
At a glance: self-adhesive backing, multi-layer construction, no extensive taping, reusable where conditions allow, recyclable materials, REACH compliance documentation, SGS-tested RoHS compliance and Australia-wide wholesale supply.
A tiled floor is a complete system. Grout, polished finishes, sealers, movement joints, edges and transitions may be more vulnerable than the tile face.
- Grit causes abrasion: Sand and metal fragments can mark glazed, polished and stone surfaces.
- Edges can chip: Tools, ladders, appliances and joinery can strike corners and thresholds.
- Grout can stain: Paint, plaster dust, adhesive and dirty water can discolour grout.
- Loose coverings move: Paper, plastic and drop sheets can tear, bunch or expose sections of floor as trades walk through.
- Repairs disrupt handover: Replacing a tile can disturb adjacent grout, adding cost, delay and disputes.
Protection does not excuse poor handling, but it creates a dependable barrier and obvious access routes.
If you need further details about marble floor protections, click here.
Evidence you can ask to see.
✓ No extensive taping
Save money & time
✓ Same-day dispatch
Australia-wide
Which Tile Floor Protection Should You Choose?
Choose according to floor condition, site activity, project length and any need for vapour transmission.
Mercury
Painting and Light Work
Painting, inspection or light maintenance on fully cured tiles.
Economical light-duty protection for controlled, shorter work.
STD Blue
General Renovation and Construction
Renovation, residential construction or general fit-out on fully cured tiles.
Balanced everyday protection for regular trade traffic
Heavy duty
Busy multi-trade projects
Longer or busier multi-trade projects on compatible cured tiles.
210gsm felt layer for greater cushioning and durability
Heavy equipment needs another layer.
Use rigid load-spreading sheets above the felt beneath mobile scaffolds, loaded trolleys, pallet jacks or heavy appliances. Flexible protection is not structural impact protection.
Quick project consultation
Which product—and how many rolls?
Answer three surface questions, then estimate the quantity using your floor area, stairs and preferred overlap.
- Surface suitability comes first
- Default overlap: 70mm
- Separate 5% cutting allowance included
Why Our Multi-Layer System Performs Better Than a Loose Sheet
1- Protective film
water and spill barrier
2- Lamination layer
strength and stability
3- Non-woven felt
cushioning and absorption
4- Adhesive backing
secure temporary grip
Advanced and proved technology
Plastic, fabric and cardboard each perform only part of the job. Our protection combines several functions.
The roll is less likely to open gaps than a loose sheet. Runs overlap by about 7cm, normally without taping every joint to the tile.
Certificates & documented testing
Evidence behind the protection
Material compliance records and documented practical tests help you assess chemical restrictions, clean removal, installation efficiency and specialist fire-performance options before ordering.
Test results apply to the identified products, materials and documented conditions. FPT-002 is a comparative installation assessment and actual time varies by site. For finished tile, confirm the surface is fully cured, clean and dry, and patch-test a hidden area first, especially polished, sealed, coated or natural-stone surfaces. The stated fire classification applies only to the relevant custom-manufactured specification, not standard stock rolls.
Five practical steps
Clean first. Test first. Then cover.
Good protection depends on the surface underneath and the way the roll is installed.
-
Confirm readiness
Check adhesive, grout, sealer and movement-joint cure requirements.
-
Vacuum carefully
Remove grit, screws, dust and tile fragments from the whole area.
-
Dry & patch-test
Test a hidden area for grip and clean removal before full coverage.
-
Roll felt-side down
Smooth forward without dragging debris. Cut over a protective board.
-
Overlap & inspect
Overlap by about 70mm and check busy routes throughout the job.
Ready for the next site?
One roll, a project quantity or a full pallet.
Tell us the tile type, finish, curing status, project area, site activity, postcode and required date. We will help match the grade and organise delivery.
Same-day
Dispatch before 12pm*
1–3 days
Typical metro delivery*
Rhodes
Express NSW pickup
FAQs
Get a Quote
All types of our floor protections come with the width of 100cm and the length of 50m.