Builders & Construction Floor Protection
Keep finished floors covered while painters, electricians, joiners and other trades finish the job. Our self-adhesive, multi-layer rolls install without taping the floor and are available in grades for light work, general building, breathable applications and higher-traffic construction.- 1m × 50m rolls
- 50m² nominal coverage
- Clean removal on compatible cured floors
- Self-adhesive, so no tape required
- Project and pallet supply
Same-day dispatch
In-stock orders confirmed before 12pm Sydney time
Rhodes, NSW warehouse
Express collection available for confirmed orders
Australia-wide delivery
Metro, regional and selected depot delivery options
Wholesale specialist
Single rolls, project quantities, pallets and reseller supply
What is builders floor protection?
Builders floor protection is a temporary covering installed over a suitable finished floor while construction or fit-out work continues. It helps isolate the surface from tracked grit, dust, paint splashes, minor spills and everyday trade traffic.
On a real project, flooring is rarely the final activity. Cabinet installers may still be moving components through a hallway, electricians may need ladders in finished rooms, and painters may return for defects. A reliable covering gives those trades a defined working surface and reduces the chance that a small incident turns into a repair, programme delay or awkward handover discussion.
- Self-adhesive felt helps runs stay settled without taping the finished floor.
- A protective face helps contain common site dirt and minor liquid exposure.
- Multiple grades let the builder match protection to traffic, floor condition and project stage.
Which construction floor protection should you use?
There is no honest “best” roll for every building site. The right grade depends on what is happening above the floor, whether the floor needs vapour transmission, and how long the area will remain in service. GSM is useful, but it is only one part of that decision.
----- Plan around the programme
Where it fits in a construction project
The best time to think about protection is before flooring is handed over to the next trade, not after the first scratch. Treat it as a small work package with an install date, inspection responsibility and removal point.
1
New homes and duplexes
Protect timber, hybrid, laminate, tile and compatible resilient flooring through cabinetry, electrical fit-off, painting defects, appliance installation, cleaning and client inspection.
2
Residential renovations
Create stable access routes through occupied homes and finished rooms while demolition waste, tools and replacement fittings move between the work zone and entry.
3
Commercial construction
Plan protection by floor, tenancy or stage for offices, retail, education, hospitality and common areas. Higher traffic may require heavier material and more frequent inspections.
4
Fit-out and defect works
Cover circulation paths before joinery, furniture, signage and final trade adjustments begin. Defined runs are easier to inspect and replace than scattered loose sheets.
5
Stairs and corridors
Use carefully cut runs and inspect edges regularly. Changes of level and turning points receive concentrated traffic, so installation details matter more than in an open room.
6
Handover preparation
Remove contaminated sections, vacuum exposed edges and schedule final removal close to cleaning or inspection. A clean lift helps preserve the finish you have protected.
Why Our Temporary Floor Protections
Practical multi-layer protection developed for construction, renovation, painting and flooring projects.
Stays in place
Strong self-adhesive backing keeps the material secure.
Comes up clean
Designed for clean removal from suitable cured floors.
No tape required
No additional tape is needed in most applications.
Fast installation
Quick to install across construction and renovation sites.
Waterproof barrier
Protects against water, paint and other liquid spills.
Built for the site
Multi-layer construction developed for active work areas.
Reliable protection
Helps protect against scratches, dust, paint and foot traffic.
Lightweight handling
Easy to carry, position and roll out across the floor.
Easy to reposition
Simple to adjust, remove and collect after the work.
Reusable
Can be reused depending on the product and site conditions.
Recyclable materials
Designed with recyclable components to reduce disposal waste.
Less waste
Durable material reduces frequent replacement on site.
-----Two quick project tools
Choose a grade and estimate your rolls
Use these results as a planning starting point. Irregular rooms, stairs, columns, detailed cuts and staged replacement can increase consumption.
Which Floor Protection Is Right for Your Project?
Answer a few quick questions and we’ll recommend a suitable product and estimate how many 50 m² rolls your project may require.
The estimate uses approximately 46.5m² effective coverage per roll after a 7cm longitudinal overlap, then adds the selected waste allowance. For a detailed estimate including stairs, use the full floor protection roll calculator.
Further details
- What is Builders Floor Protection?
- Where it can be used?
- Floor protection importance
- Video library
- Who is our customer
- Cities we cover
- Floor protection spec sheets
Builders floor protection is the best temporary surface covering that builders use them to protect timber, hybrid, laminate, vinyl and tiled flooring from damage during construction, renovation and fit-out jobs.
Builders floor protection is typically installed as a shield to protect surfaces from scratches, dirt, spills, moisture, dropped tools and constant foot traffic.
Our temporary floor protection is the new generation of temporary floor covering and it's made from multiple layers with a self-adhesive backing, so it stays securely in place without relying on extensive taping.
Builders use self-adhesive Floor Protection® products to reduce the risk of costly repairs, maintain a tidy, professional site, and hand over a pristine, undamaged space to the client.
Some Australian builders may also recognise this type of product through retail options such as Builders Edge Temporary Floor Protection. Floor Protection® supplies an independent range of self-adhesive floor protection rolls for residential construction, commercial projects, renovations and fit-outs.
Protecting your floors through new home construction, renovations or commercial fit-outs is a genuine challenge, which is why we've developed pro-grade temporary floor protection built specifically for the conditions of the Australian construction industry.
At Floor Protection®, we've supported Australian builders, contractors, project managers and resellers for years. Whether you're constructing a new home, renovating an existing property, managing a commercial fit-out or running a large-scale build, our floor protection systems keep finished surfaces safe until the job is complete.
Flooring is usually laid before a project is really finished. Of course that gets those construction schedules moving forward a bit better but it's also a major contributor to the risk of floors getting damaged, and that can be seriously costly to fix.
People like painters, electricians, plumbers, and cabinet installer still end up working on top of the flooring after it has been installed. And if you don't do anything to stop it, soon your finished floor will be looking rough from all the foot traffic, tools and equipment being dragged over it, dust, paint splatters, moisture and building materials all damaging the floor.
Our Floor Protection® reduces the risk of scratches, dents, stains and costly repairs, while helping keep the site looking clean and professional throughout the remaining works.
Paper, cardboard and plastic sheeting simply don't hold up in these conditions. Self-adhesive floor protection stays in place very well once installed.
We supply floor protection products to:
- New home builders
- Residential builders
- Construction companies
- Construction companies
- Flooring contractors
- Painting contractors
- Fit-out companies
- Property maintenance companies
- Resellers
- Building material suppliers
Custom branding, custom colours, fire-retardant specifications and private-label solutions may also be available for larger orders.
Construction projects happen throughout Australia, and reliable supply is essential to keeping projects moving.
We supply floor protection products across:
- Sydney
- Melbourne
- Brisbane
- Perth
- Adelaide
- Canberra
- Hobart
- Darwin
- Regional Australia
Whether your project is located in a major metropolitan area or a regional location, we can assist with product supply and delivery.
--- Install it properly
Four steps before the next trade walks in
A good roll cannot compensate for grit trapped underneath, an uncured coating or a blade dragged across the finished surface. Preparation and routine inspection are part of the system.
Step 1
Confirm the floor
Check the floor manufacturer’s cure time and temporary-covering instructions. Make sure the surface is compatible, dry and ready to be covered.
Step 2
Remove grit
Sweep and vacuum thoroughly, especially at entries. A hard particle beneath any covering can mark the floor when traffic passes over it.
Step 3
Role and overlap
Place the felt side down, smooth the run forward and overlap the next run by about 7cm. Cut on a protective board, never directly on the floor.
Step 4
Inspect and replace
Check entries, joints and busy routes during the job. Remove any torn or grit-contaminated section rather than letting damage travel underneath.
Builders Floor Protection FAQs
Ready for the next site?
Planning protection for an active site?
Tell us the floor type, approximate area, level of traffic, postcode and required date. We will help narrow down the grade, roll quantity and delivery option without overspecifying the job.
How many rolls will your project need? Check the online calculator →
Get a Quote
Looking for some top-notch builders floor protection for your next project?
We work with all kinds of clients, from new home builders and residential builders to commercial construction companies and resellers, our team can help select the right floor protection solution for your building.
All type of our floor protections come with the width of 100cm and the length of 50m.