Watch Our Floor Protection Range
Compare our four self-adhesive temporary floor protection rolls. Every roll measures 1 metre wide by 50 metres long and provides 50m² of nominal material coverage.
Mercury 140gsm
Lightweight self-adhesive protection for painting, maintenance, touch-ups and controlled short-term renovation work on suitable, fully cured surfaces.
STD Blue 160gsm
A general-purpose multi-layer floor protection roll for painting, renovations, property maintenance and commercial fit-out projects.
Anti-Slippery 160gsm
Breathable self-adhesive floor protection designed for suitable newly installed or moisture-sensitive surfaces and active work areas requiring greater stability underfoot.
Heavy Duty 260gsm
Our thickest self-adhesive floor protection roll, developed for construction, commercial fit-outs and projects exposed to greater traffic and impact.
How to Lay Down Floor Protection Rolls
Watch a practical temporary floor protection installation on a finished floor. The demonstration shows how the roll is positioned, smoothed and joined to create a clean and stable protected work area.
What the video demonstrates
- Preparing a clean and dry working surface
- Positioning and rolling the material forward
- Smoothing the protection as it is installed
- Joining adjacent runs with approximately 7cm overlap
- Creating a neater surface without ordinary floor tape
Breathable Floor Protection Test
See the Anti-Slippery 160gsm product demonstration and review the verified water-vapour transmission test information.
Verified Test Information
Why Use Self-Adhesive Floor Protection?
These videos explain how modern multi-layer self-adhesive floor protection works, how it is installed and how it performs during flooring, building and renovation projects.
What Is Self-Adhesive Floor Protection?
A quick introduction to the multi-layer construction, self-adhesive backing and practical purpose of temporary floor protection.
How to Use Self-Adhesive Protection
See how the roll is handled and installed to create a more stable protected surface during painting, flooring and renovation work.
Protection After Flooring Installation
See how temporary floor protection can cover completed flooring before painters, installers and other trades return to the area.
Floor Protection on a Renovation Job
Watch temporary floor protection being used in a real renovation environment to protect completed surfaces while work continues.
Open on YouTubeTemporary Floor Protection FAQs
Practical answers about self-adhesive installation, coverage, breathability, removal and reuse.
What is temporary floor protection?
Temporary floor protection is a removable covering placed over a finished floor during construction, painting, renovations, fit-outs or maintenance. It helps protect the surface from dust, dirt, paint splashes, scratches, foot traffic and everyday site activity.
How do you install self-adhesive floor protection?
Confirm that the surface is suitable, fully cured, clean and dry. Test a small hidden area, place the adhesive felt side against the floor, roll the material forward and smooth it as you work. Overlap adjoining runs by approximately 7cm and inspect the covering throughout the project.
Does adhesive floor protection leave sticky residue?
Our products are designed for clean removal when they are installed correctly on a suitable, fully cured and compatible surface. Conditions and floor finishes vary, so always conduct a small patch test and follow the flooring or coating manufacturer’s instructions before covering the complete area.
Can floor protection be used on newly installed floors?
Only cover a newly installed or coated floor after the flooring installer, adhesive supplier or coating manufacturer confirms that it is ready. A breathable protection grade may be more appropriate where the floor still needs to release moisture vapour, but product compatibility and curing instructions must still be confirmed.
What is breathable floor protection?
Breathable floor protection is designed to allow a measured level of water vapour to pass through the material. Our Anti-Slippery 160gsm product was tested to ASTM E96/E96M-24a, Procedure B, with a water-vapour transmission result of 1,176 g/m²/24 hours.
How much area does one roll cover?
Each roll measures 1 metre wide by 50 metres long and contains 50m² of material. Practical coverage will be lower after allowing for approximately 7cm overlaps, cuts, stairs, corners, irregular room shapes and installation waste.
Can temporary floor protection be reused?
It may be reused when the material is removed carefully and remains clean, undamaged and sufficiently adhesive. Reuse depends on the product grade, site conditions, contamination, storage and the condition of the backing after removal.
Need Floor Protection for Your Next Project?
Tell us about the floor type, project size, expected traffic and delivery location. We can help you compare the available products, estimate roll quantities and arrange supply across Australia.
52 Walker Street, Rhodes NSW 2138